Gamatronic Electronic Industries Ltd.
User Guide: MEGA V2 SA25, Release 1.5
39
7.2.3
Verify proper output voltage
Before turning the UPS on for the first time, go to the first profile screen to verify that the nominal
output voltage is correct for your country and location.
Figure 38: Verify proper output voltage
on page 17 explains how to display the Profile screen.
In the unlikely event that you need to change the UPS's output voltage,
see “Changing the nominal output voltage” on page 42.
7.2.4
Set the system clock
Now set the system clock to the correct date and time.
See “Setting the system clock” on page 41.
7.2.5
Modify the screen contrast (optional step)
You can modify the screen contrast, if necessary.
See “Setting screen contrast” on page 42.
7.2.6
Set automatic restart mode (optional step)
You can enable automatic restart mode at this time, if desired.
See “Automatic Restart” on page 45.
