G
AMATRONIC
E
LECTRONIC
I
NDUSTRIES
L
TD
.
P+ Premium SA, 15 kVA,
rel.
1.4
9
3.2
The
POWER+
Display Screen
The display screen on the
POWER+ PREMIUM SA 15
control panel shows the current operating mode and
related critical data. There are several distinct data screens that can be shown on the
POWER+ PREMIUM
SA 15
display screen.
3.2.1
The Main Screen
The
POWER+ PREMIUM SA 15
Main Screen is the default display on the
POWER+ PREMIUM SA 15
screen. From any other screen, if the keyboard is not used for 45 seconds, the
POWER+ PREMIUM SA 15
returns to the Main Screen.
The Main Screen shows the UPS’s current operating mode and other critical data.
Other screens describing current operating conditions can be seen by navigating “upwards” or “downward”
with the UP/DOWN key.
The first line of the Main Screen shows whether the UPS is currently on or off. The second line tells you the
most important information about the UPS’s current status. Most of the time it will read “NORMAL MODE”.
The UPS can also automatically transfer to:
•
BATTERY MODE
•
BYPASS MODE
•
UPS OFF
The L1, L2, and L3 numbers in the Main Screen show the current load rate as a percent of maximal ac load
at each phase.
