20
P+ Premium SA, 15 kVA, rel. 1.4
3.2.2.3
AC INPUT SCREEN
To see the current status of the ac input to the UPS, from the Main Screen, press
three times.
The checkmark indicates that the ac voltage of each input phase is within an acceptable range; otherwise
an “
X
” is displayed instead of the checkmark.
The voltage and current for the three input phases is displayed.
3.2.2.4
BYPASS SCREEN
To see the current status of the Bypass, from the Main Screen, press
four times.
The checkmark indicates that the voltage of all three phases at the Bypass Switch is within an acceptable
range. If the voltage of any of the phases is out of range, an
X
is displayed instead of the checkmark.
The voltage and current for the three Bypass phases is also displayed.
