42
P+ Premium SA, 15 kVA, rel. 1.4
8.
S
ETTING
S
YSTEM
P
ARAMETERS
There are several system parameters that can be modified as needed. In general, you only need set these
parameters once, during the first-time setup of the
POWER+ PREMIUM SA 15
.
8.1
Setting the system clock
The system clock is used in recording entries to the
POWER+
event log. The clock should be set to the
correct time so that the log entries will reflect the true time of events.
To set the system clock:
1.
From the Main Screen, press the
Ent
button to display the
Main Menu
.
2.
On the Main Menu, select
SET CLOCK
and press
Ent
.
This displays the
CLOCK
screen, which shows the current time and date according to the
POWER+
PREMIUM SA 15
clock. The information is displayed in the format
HH:MM:SS
DD:MM:YYYY
3.
To change the time and date, press
Ent
.
At any time in the following process you can press
Esc
to exit to the Main Screen. The changes you
made before pressing
Esc
are saved.
4.
The
SET MINUTES
screen is displayed.
Use the
UP/DOWN
button to change the minutes setting.
5.
Press
Ent
. The
SET HOUR
screen is displayed.
Use the
UP/DOWN
button to change the hours setting.
6.
Press
Ent
. The
SET DAY
screen is displayed.
Use the
UP/DOWN
button to change the day setting.
7.
Press
Ent
. The
SET MONTH
screen is displayed.
Use the
UP/DOWN
button to change the month setting.
8.
Press
Ent
. The
SET YEAR
screen is displayed.
Use the
UP/DOWN
button to change the year setting.
9.
Press
Esc
to exit to the Main Screen.
8.2
Setting screen contrast
The screen contrast function controls the visibity of the message text against the screen background. The
default setting of 144 is usually satisfactory, but you can modify the default setting between the values of 0
and about 210, if needed.
To m
odify the console contrast:
1.
From the Main Screen, press the
Ent
button to display the
Main Menu
.
2.
From the Main Menu, select
ADVANCED OPTIONS
and press
Ent
.
3.
From the ADVANCED menu select
SCREEN CONTRAST
and press
Ent
.
The following screen is displayed.