Gamatronic Electronic Industries Ltd.
82
Power+ Technical Guide
The following information is displayed on this screen:
y
DATE
- Current date
y
TIME
- Current time
y
AC-VOLT
- System input voltage from mains
y
AC-CURRENT
- System input current from mains
y
AC-Output Voltage
– System output voltage
y
FL
- Number of the active flash
y
PD
- Peripheral device status
y
UP
– UPS general status
From the main screen you can navigate to:
y
The
Fast Information
Menu
through which you can access the 7
Fast Information
screens
y
The
Main
Menu
from which you can access:
y
Monitor Screens that let you monitor the system and components
y
Calibration Screens that let you calibrate the system and components
y
Control Screens that let you control the system and components
Fast Information Screens
In addition to the many screens displaying detailed information about all aspects of the system,
there are seven
Fast Information
screens that contain further details about the real-time status
of the system. These screens can be accessed from the
Fast Information Menu
.
Network Fast Information Screen
This screen provides information about network related parameters such as the IP address, the
gateway address and the mask.
There is also a counter that shows the number of times the controller failed to connect with the
server. The maximum value that the counter can display is 225. Under normal operating
conditions the value should be 0.
There is also a count of the number of times there was no SNMP link. This value resets the
Network card.
Dry Contact Fast Information Screen
This screen provides real-time data on the status of the input and output dry contacts.
For both input and output dry contacts:
y
A filled circle appears when the dry contact is closed.
y
An unfilled circle appears when the dry contact is open.
