G
AMATRONIC
E
LECTRONIC
I
NDUSTRIES
L
TD
.
42
Power+ PREMIUM, Installation Guide, rel.
1.7
5.
I
NSTALLING THE
LCD
SCREEN
When installed, the LCD screen is located in the front top of the UPS (see Figure 1).
To protect the LCD screen from damage, it does not arrive installed.
1.
The LCD screen comes in its own box. Open the box, remove the screen from the box, and remove
the mounting apparatus
Figure 43: Remove the mounting block
2.
Loosen the nut on the rear of the mounting block (without removing the nut) so that the nut can get
into the track on the rear of the LCD screen.
Figure 44: Slightly loosen the nut on the mounting block
3.
Attach the mounting block to the LCD screen by sliding the nut up the track on the rear of the screen.
Then
tighten the mounting block screw
to prevent the mounting block from moving.
Figure 45: Attach the mounting block to the rear of the LCD panel
