G
AMATRONIC
E
LECTRONIC
I
NDUSTRIES
L
TD
.
Power+ PREMIUM, Installation Guide, rel.
1.7
33
Figure 32: Front panel of the UPS module
4.2
Physical removal of a UPS module
1.
Loosen the two screws that secure the module to the UPS frame – one screw on each side of the
module face.
2.
Grip the module by the handle on the front face of the module and pull the module out, gently but
firmly.
4.3
First-time insertion of power modules at system
installation
When the installation instructions in section 2.3 call for it, insert the power modules into the module shelf.
For each module, proceed as described in section 4.1:
4.4
Replacement of a module in an installed system
To replace a module in an operational system:
