Gamatronic Electronic Industries Ltd.
28
POWER+
SA
User Guide, Release 1.6
Event log entries
To see the latest entry in the Event Log, from the Active Alarm display press
Ent
.
To scroll backwards to previous entries, press the
Down
button.
To scroll forwards again to later entries, press the
Up
button.
To exit the Event Log entirely and return to the Main Screen, press
ESC
.
A list of all possible log entries can be seen on page 31.
The event log has the capacity to record 200 events. When this number is
exceeded, the logwriter “wraps around” to the beginning of the file, so that the oldest
events in the log are overwritten by the newest events.
The illustration shows a typical log entry.
•
The first line gives the number of the log entry. This is the 23
rd
log entry.
•
The second line gives the log text – in this case, “INVERTER OFF”. The log
entry shows that the inverter was turned off.
•
The third line show the time of the log entry (HH:MM:SS).
•
The fourth lines shows the date of the log entry (DD.MM.YY).
•
The last line prompts you to scroll up or down to see later or earlier entries.
Resetting the event log
To erase the current contents of the event log:
1.
From the Main Screen, press the
Ent
button to display the
Main Menu
.
2.
On the Main Menu, select
Advanced Options > Technicians Menu >
Reset Event Log
.
3. Press
Ent
.
