Gamatronic Electronic Industries Ltd.
44
POWER+
SA
User Guide, Release 1.6
Set the system clock
Now set the system clock to the correct date and time.
See “Setting the system clock” on page 45.
Modify the screen contrast (optional)
You can modify the screen contrast, if necessary.
See “Setting screen contrast” on page 46.
Set Automatic Restart mode (optional)
You can enable automatic restart mode at this time, if desired.
See “Automatic Restart” on page 50.
Operation
To turn the UPS on, press the ON/OFF button twice and wait a few seconds.
The following screen is displayed.
The “AC Input” and “Normal” LEDs should be lit.
Turn on the
AC output
circuit breaker.
You can now operate the equipment attached to the
POWER+ SA
.
