Gamatronic Electronic Industries Ltd.
POWER+
SA
User Guide, Release 1.6
45
8.
S
ETTING
S
YSTEM
P
ARAMETERS
There are several system parameters that can be modified as needed. In general,
you only need set these parameters once, during the first-time setup of the
POWER+ SA
.
Setting the system clock
The system clock is used in recording entries to the
POWER+
event log. The clock
should be set to the correct time so that the log entries will reflect the true time of
events.
To set the system clock:
1.
From the Main Screen, press the
Ent
button to display the
Main Menu
.
2.
On the Main Menu, select
SET CLOCK
and press
Ent
.
This displays the
CLOCK
screen, which shows the current time and date
according to the
POWER+ SA
clock. The information is displayed in the format
HH:MM:SS
DD:MM:YYYY
3.
To change the time and date, press
Ent
.
At any time in the following process you can press
Esc
to exit to the Main
Screen. The changes you made before pressing
Esc
are saved.
4. The
SET MINUTES
screen is displayed.
Use the
UP/DOWN
button to change the minutes setting.
5. Press
Ent
. The
SET HOUR
screen is displayed.
Use the
UP/DOWN
button to change the hours setting.
6. Press
Ent
. The
SET DAY
screen is displayed.
Use the
UP/DOWN
button to change the day setting.
7. Press
Ent
. The
SET MONTH
screen is displayed.
Use the
UP/DOWN
button to change the month setting.
8. Press
Ent
. The
SET YEAR
screen is displayed.
Use the
UP/DOWN
button to change the year setting.
9. Press
Esc
to exit to the Main Screen.
