Gamatronic Electronic Industries Ltd.
50
POWER+
SA
User Guide, Release 1.6
9.
A
UTOMATIC
R
ESTART
In the event of a prolonged power outage, the UPS turns itself off automatically after
the batteries have been exhausted. You can instruct the
POWER+ SA
to start up
automatically so that it will supply current to the load devices when the AC power is
restored. This feature is called
automatic restart
.
If you do not use the automatic restart procedure, when the AC power returns the
recharging process begins automatically, but no power is supplied to the load.
Determining the current automatic restart setting
To determine if the automatic restart mode is on or off, go to the PROFILE screen
To see the UPS Profile screen, from the
Main Screen
, press the
Down
button once.
The Profile screen shows the current Automatic Restart status.
Changing the automatic restart status
1.
From the Main Screen, press the
Ent
button to display the
Main Menu
.
2.
On the MAIN MENU, select
ADVANCED MENU
and press
Ent
.
3.
On the ADVANCED MENU, select AUTOMATIC RESTART and press
ENT.
