User Guide
Gamatronic Electronic Industries Ltd.
µ
PS Series 3:3 Phase 10kVA (GEMS)
Page 30
FREQ (Frequency)
Press the FREQ button to display the
unit’s output and bypass frequency
status.
The operating inverter frequency is determined by the bypass frequency
when operating normally. Otherwise, the bypass frequency is determined
by the quartz oscillator and should be set at 50/60 Hz.
BATT (Battery)
Press the BATT button to display the
battery voltage.
TIME
Press the TIME button
to display the system current
day/month (DD/MM), and current time
(HH:MM:SS).
STAT (Status)
Press the STAT button
to display the UPS status and
accumulated working time
(HHHHH:MM:SS).
Note: This is the default display mode.
TEMP (Temperature)
Press the TEMP button to display the
status of the unit’s heatsink
temperature (Normal or Overheat).