FZ-G1 DOCKING STATION FEATURE IDENTIFICATON
NOTE:
RF connections are configurable in the BIOS of
the FZ-G1 computer. The terms "UPPER" and "LOWER"
positon used in the BIOS of the FZ-G1computer
correlates with Gamber Johnson FZ-G1 Docking
Station "Ant 1" and "Ant 2" as follows: "UPPER" = "Ant 1"
and "LOWER" = "Ant 2".
Lock
Thumb Knob
Alignment Tabs
Docking Connector
Ground Pins
Dual RF Connector
Serial
Video
HDMI - If using HDMI cable,
snap ferrite (GJ# 15064 -
Fair-Rite Part# 0431167281)
supplied in the hardware
bag onto the HDMI cable as
close to the dock as possible
Ethernet
(2) USB 3.0
15.6 Vdc Input
RF Switch - move to
outside position for
External RF Antenna
4x 1/4-20unc
mounting studs
75MM hole pattern
Dual-RF output
location
Cable Tie Locations
