DOCKING THE COMPUTER
1. Push the Latch Button to open the
latch if the dock is in the closed
position.
2. Insert the front of the CF-54
computer under the front hooks on the
dock. Look at the handle to make
sure the front of the computer is
centered on the front hooks.
3. Lower the back of the computer
down onto the dock and the docking
connector.
4.
Lightly press down on the back of
the computer to ensure if is fully seated
while closing the latch.
5. The rear hooks will engage the back
of the computer to hold it in place.
TO UNDOCK THE COMPUTER
1. Press the Latch Button. The front
latch is spring loaded and will
automatically open.
Lightly press down on the back of the
computer
and the rear hooks will retract
from the computer.
2. Lift the back of the computer off the
dock and docking connector.
3. Pull the front of the computer out
from under the front hooks.
5 / 6
