background image

SELECTING A SAFE TREE:

• Select a healthy straight tree that fits within size limits larger than 9-inches in diameter and 

smaller than 24-inches in diameter at attachment height. 

• Always thoroughly inspect tree from all sides before installing product.

• Be sure treestand platform is level. Tree must not lean or have any irregular shapes.

• Do not select a tree with vines or limbs below your desired hunting height.

• Never attach treestand to limbs!  Always attach treestand to main trunk of tree.

• Never use treestand on trees with wet, icy, slippery, loose or scaly bark.

TREESTAND MINIMUM AND MAXIMUM TREE SIZE: 9 – 24” DIAMETER!
Never use treestand on a dead, leaning, diseased, loose barked tree, tree with 

excessive vines or on utility pole or any other man made structure.
Never use on trees that contain nails, screws, or other sharp objects that may cut, 

sever, or puncture strap webbing or cables!
Never rely on a tree branch for support!
Failure to follow these instructions can lead to serious injury or death!

FULL BODY SAFETY HARNESS (FALL ARREST SYSTEM – FAS):

You must wear and use supplied 4 point full body harness when installing and 

using this treestand.
Always connect harness to tree as soon as possible and prior to stepping on 

the platform and always remain harness to tree until you leave platform.
Read and understand included Full Body Harness Instructions, Warnings, and 

watch safety video for instructions on using your full body harness.
Failure to follow these instructions can result in serious injury or death.

Refer to Full Body Harness (FAS) Instruction Manual supplied with this treestand for proper 

wear, adjustment, usage and maintenance. 

THE REST OF THE INSTRUCTIONS IN THIS MANUAL REQUIRE YOU TO WEAR AND USE 

THE SUPPLIED 4 POINT FULL BODY HARNESS SUPPLIED WITH THIS TREESTAND.

PRACTICE AND BECOME FAMILIAR WITH PRODUCT AT GROUND LEVEL:

Always practice attaching/detaching, adjusting and using treestand and full body harness at 

ground level prior to using at elevated positions.

Prior to using treestand and full body harness

 

at elevated positions for first use of each season, 

test operation and use at ground level.

Installation Instructions

WARNING!

WARNING!

24

Summary of Contents for 163790




































Reviews: