38
7100 Series Installation/Operating Manual —
P/N 9000-0447:J 08/28/08
Basic System Module (BSM)
Digital Communicator Operation (7100-D Model)
3.8 Digital Communicator Operation (7100-D Model)
The 7100-D digital communicator model features numerous formats for communication to a
central station. The 7100-D provides the following functions:
•
Line seizure - takes control of the phone lines, disconnecting any premises phones using the
same lines.
•
Off/On-Hook - perform on and off-hook status to phone lines.
•
Listen for dial tone - 440 Hz tone typical in most networks.
•
Dialing the Central Station phone number – programmable.
•
Discern proper Central Station “ACK” and “Kiss-off” tone.
•
Transmit data to the Central Station.
•
Verify that data has been accepted by the Central Station.
•
Hang-up and release phone lines.
•
Communicate in a variety of formats.
3.9 Central Station Reporting
UL Listed receivers compatible with the 7100 are listed in Table 3.9.1.
Manufacturer Receiver
Model
Formats
Silent Knight
Model 9000†
SIA-8
SIA-20
SK4/2
3/1 14
3/1 23
Silent Knight
Model 9800/9500
SIA-8
SIA-20
SK4/2
3/1 14
3/1 23
Contact ID
Ademco Model
685
3/1
14
3/1 23
Sur-Gard
(Ver. 1.64 or higher)
SG-MLR2-DG
SIA-8
SIA-20
SK4/2
3/1 14
3/1 23
Contact ID
Osborne Hoffman
Quickalert
SIA-8
SIA-20
† If you are using the Model 9000 and the message “HELP” appears on the printer after
attempting to download, the 9000 software must be upgraded. The Model 9000 must have
the Model 9307 software package, Revision 900501 or later, to print the PROGRAMMING
PASS and PROGRAMMING FAIL messages.
Table 3.9.1 UL Listed Receivers Compatible with the 7100
