56
7100 Series Installation/Operating Manual —
P/N 9000-0447:J 08/28/08
System Programming
CONFIG. Menu Selections
Main
Config
DACT
Line Options
[LINEn] 1: Dialing Mode (0)
[OPTS ] 2: Line Monitor (ON)
1: Scrolls through Dialing Mode options for Line n [0…4]
0=USA Tone or rotary (40/60), 1=USA Rotary only,
2=Tone only, 3=Tone or European Rotary (33/67),
4=European Rotary only.
2: Toggles Line Monitoring ON/OFF for Line n.
Note: periodic line test is enabled when either line’s Line
Monitor setting is 1.
Main
Config
DACT
Account Options
Comm Format
[ACCTn] 1:Format (0)
[FORMT]
1: Scrolls through communication format options for
Account n [0…6]
0=SIA DCS 8, 1=SIA DCS 20, 2=Ademco Contact ID,
3=4/2 1400 Hz, 4=3/1 1400 HZ, 5=3/1 2300 HZ, 6=4/2
2300 HZ
Main
Config
DACT
Account Options
Comm Format
[DACT] 1: DACT (OFF) :FirstTest 00:00 Config
[OPTS] 2:ACDelay (10) 3:Tests/day (1)
1: Toggles DACT operation ON/OFF.
2: Toggles AC Fault reporting delay (0, 10, 20 hours).
3. Scrolls through number of lines tests per day [1…4].
<,>: Scrolls First Line Test Time setting (15-minute
steps).
Table 5.2.8 Config Menu Tree Display and Selections (Continued)