Digital Receivers Installation and Configuration
Radionics D6600 Setup
14
FocalPoint™ Receivers Gateway Installation & Operation Manual - P/N: 53251:Rev: A 9/8/09
2.3 Radionics D6600 Setup
Digital receivers must be installed according to the
“Digital Receiver Setup Guidelines” on
page 11
.
2.3.1 D6600 Description
The Receivers Gateway is the software interface between the Radionics receiver and the FocalPoint
network monitoring system. The Receivers Gateway redirects information from a remote site and
displays alarm and trouble event information that can be used in conjunction with a Workstation
and other FocalPoint clients. The Radionics D6600 receiver is a modular multi-format digital
receiver designed to receive, display and route data received from the Internet or private Intranet.
The system that is created between the Radionics receivers and the Receivers Gateway allows the
Workstation to display events that use the 6500 Contact ID format.
Figure 2.2 Radionics D6600 Receiver Application Example
2.3.2 Supported Formats
The D6500 Mode ADEMCO Contact-ID Format is the supported address format.
Workstation
(Optional)
Workstation w/
Receivers
Gateway
Ethernet
Wide Area
Network
RS-232
D6600
(Must be within 20 feet of the Workstation)
