IF 610 Installation and Operation Manual
Issue 3, 10/04/00
Firmware Ver. 7
19
Trouble Condition
A trouble condition occurs when a fault or potential problem develops within the
system, system components, or system wiring connections. When a fault is detected
the system common
Trouble Display
LED will be illuminated on the common control
display, and the system common audible will be sounded. The origin of the fault
message will be shown on the LCD alphanumeric display and logged into the History
Buffer to provide a time stamped record of the event's occurrence. When the
Acknowledge
button is depressed, the system trouble audible is silenced and the
system
Trouble Display
LED remains illuminated. Should another trouble occur the
panel will return the trouble audible. Refer to the Appendix, System Event Messages,
for a complete listing of message displays.
When all trouble conditions have been corrected the panel will extinguish the
common
Trouble Display
LED, returning the system to the normal quiescent
condition.
Status: FAULT
MM/DD/YY HH:MM
Fault in Ckt.#: __ Dev. #: __
Description of Fault
Figure O-6
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
