IF 610 Installation and Operation Manual
Issue 3, 10/04/00
Firmware Ver. 7
75
To assign a "logical" Output Group
5. Press
"
Enter
". Figure 15 is now displayed.
Enter Output Group: XXX
Figure 15
6. Using numeric keys, enter the desired output group number or press the signal
circuit switch. The assigned output group number now is displayed in top left as
shown in Figure 15A.
xxx
Enter Output Group: xxx
Figure 15A
7. Enter all desired output group numbers. The assigned output group
number is displayed in the top left of the screen. As the next output group
number is entered, group numbers are sequentially arranged (ascending order).
Enter up to 256 group output numbers, see Figure 15B.
>>
NOTE: To cancel an individual output group, enter that group number and
press "Enter". The group number is not shown and is then canceled.
xxx xxx xxx xxx xxx xxx xxx xxx xxx
xxx xxx xxx xxx xxx xxx xxx
Enter Output Group: xxx
Figure 15B
8. Repeat sequential steps (3 through 7) for each associated input/output group to be modified in
the selected circuit.
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
