IF 632 Installation and Operation Manual
Release: 3 01/31/01
133
To select word options from the control panel:
Prompt Description
<a1> =
first lower case letter of a word or key
<a2> =
second lower case letter of a word or key
<a3> =
third lower case letter of a word or key
<a
#> =
etc. (sequential order)
<A1> =
First Upper Case letter of a word or key
<A2> =
Second Upper Case letter of a word or key
<A#>
etc. (sequential order)
1.
Press the Letters/ Numbers key on the Keypad until the proper selection
is displayed. The display indicates the selection by the following means.
2.
When selecting the first letter on a key, <a1> should be displayed in the
upper right hand corner of the display. To select the second letter on a key,
press the Letters/ Numbers key until <a2> is displayed. <a3> should be
displayed if the third letter is desired and <#> should be displayed if the
number associated with that key is desired.
3. The case of the letters may be changed by pressing the Upper Case key. The
case is indicated by the case setting of the <A> within the brackets shown on
the display.
4. When the desired number or letter field is displayed press the key associated
with it then go on to the next letter, number or punctuation mark.
5. When the text entry is complete press the “
Enter
” key and go on to the next
text entry to change.
6. To exit the programming area, and save the changes made, press the “
Enter
”
key a second time..
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
