15
DATE & TIME
The date and time of the event will be in the following format
Month/day/year hour: minute
The hour is transmitted in 24 hour format.
NODE NUMBER
STATUS
NUMBER OF ALARMS
DATE & TIME
ACTION
CIRCUIT NUMBER
DEVICE NUMBER
NODE NAME
UP TO 40 CHARACTERS OF USER DEFINABLE TEXT
UP TO 40 CHARACTERS OF USER DEFINABLE TEXT
ACTION
The
ACTION
message determines the type of alarm, fault or control change generated within the node.
The following is a list of system generated ACTION messages:
NODE NUMBER
STATUS
NUMBER OF ALARMS
DATE & TIME
ACTION
CIRCUIT NUMBER
DEVICE NUMBER
NODE NAME
UP TO 40 CHARACTERS OF USER DEFINABLE TEXT
UP TO 40 CHARACTERS OF USER DEFINABLE TEXT
Action Messages, System Setup
Description
"Skip System I/O Assignments"
System power up
"Begin System I/O Assignments"
System programming itself
"Programming Mode Entered"
Ignore any data from this point until “Exit Program
Mode” is received
"Exit Program Mode"
See Programming Mode Entered
Action Messages, Control
Description
"Commencing System Reset"
System reset button has been depressed
"System Idle"
System reset completed system is normal
"System Acknowledged"
System Acknowledge button depressed
"Signals Deactivated"
System Signal Silence button depressed Audibles
Silencing
"Signals Activated"
System Signal Silence button depressed Audibles
reactivating,
"Signals Silenced Automatically"
System automatically silenced the audible signals
Action Messages, Fire Alarm
Description
"Fire Alarm in"
The "Fire Alarm in" message is followed by CKT
followed by the "circuit number" ( I -128). If also
an addressable CKT this will be followed by DEV
and the "device number" (1-126) See Examples
Technical Manuals Online! - http://www.tech-man.com
