27
GM-Line GM3
Icon
Description
Hold for 3 seconds to release or lock the keypad.
• The “Off” label appears on the display and the keyboard is unlocked.
• The “On” label appears and the keypad is locked.
Return to ambient temperature display
+
+
Application with thermostat:
To see the set point;
The set key gives access to a quick menu where it is possible to see the following:
•
The setpoint value.
•
The actual setpoint value (rSE).
To change the set point;
1. Press and hold SET for 3 seconds until SET is displayed and the “°C” starts blinking
2. Press SET again and the value of the setpoint will be displayed
3. Increase or decrease the setpoint with the arrows
4. To remember the new setting value press 4 x SET or wait for 60 seconds
Note
•
If the Probe (P1) message appears on the screen, contact the Gamko service department or your supplier.
View the instruction on video: https://youtu.be/FIgvpGHDDHc
Temperature
The temperature range of the bottle cooler is between 2°C and 18°C and depends on the type of drink that is
being cooled. See our drinks temperature guide for advice on best serving temperatures.
Instruction guide for Eco Mode
This bottle cooler is fitted with a thermostat that helps you save energy by
automatically switching the fridge to a higher temperature (Eco Mode) during
closing times. In this guide, we explain how to set it up for your business to
save maximum energy. (applies to equipment produced after 01/01/24)
Summary of Contents for GM Series
