28
Thermostat
Using the thermostat
For use and settings of the thermostat, please refer to the manual supplied with this product.
Application with XR07CX type thermostat:
To see the set point.
1. Push the
SET
key two times, the set point will be showed.
2. Push the
SET
key three times to return to normal visualisation.
To change the set point
1. Push the
SET
key for more than 2 sec and then push the SET key again;
2. The value of the set point will be displayed and the “°C” LED starts blinking;
3. To change the Set value push the
UP
or
DOWN
button;
4. To memorise the new set point value push the
SET
key three times.
Note:
The new set value is fixed even if you leave the settings without the SET button have been pressed.
Light on/off
Manual
defrost
Set button
Up/down
button settings
