- 3 -
3.3 Tare
When the goods are placed on scale platform and it the weight is regarded as
tare to deduct. Press TARE, the window will display 0.
3.4 Fixed number call
3.4.1 If you need to set the fixed number call, the operating steps are as follows:
input the fixed number, then press FIXED NUMBER CALL key. If the count on the
platter is more than the set number, the scale will give our beep sound. If the unit
weight window displays ''ERR NO", it means the input value is wrong (for example,
if it has a decimal point).
3.4.2 To cancel the set fixed number call, the operating steps are as follows: Press 0,
and then press FIXED NUMBER CALL.
3.5 Counting for Known unit weight
If the unit Wright of goods is already known, directly input the unit weight value by
pressing digit keys and press UNIT WEIGHT SET to confirm it, at this time the
weigh value will be displayed in its unit weight window and you can count the
goods.
3.6 Counting for unknown unit weight
If the unit weight of the goods isn't known, you can sample first, the steps are as
follows:
3.6.1 Place certain amount of the goods on the platform, the weight value will be
displayed in its weight window.
Note: When sampling goods, you must fully pay attention to the weight of the
goods and unit error. You should generally sample more goods, thus the average
value limit obtained will be comparatively accurate.
3.6.2 Press the digit keys to input the count of sampling; the value will be displayed
in its unit weight window.
3.6.3 Press COUNT SET to set it, at this time, the unit weight counted is displayed
in its unit weight window and the sampled Count is displayed in its count window.
Now the operating for the Unit Wright input is finished. If file unit weight
window displays Error, it means the input value is wrong (For example, if it has a
decimal point).
3.6.4 Place the goods counted on the platform, at this moment the count of goods
will be displayed in its count window.
Note: In the way of sampling as 3.5 and 3.6, if the unit weight window displays
I0SPI, it means the unit weight is too light. Every sample weight should be more
than or equal to 0.2d.
3.7 Clearing of unconfirmed input digit (unit weight of sampling or count)
