1.
Introduction and Setup
Unpacking and In the Box
Thank you for choosing our Leko Toro. For your own safety, please read this manual before
installing or using the device. This manual covers the important information on installation and
applications. Please install and operate the fixture with following instructions. Meanwhile,
please keep this manual for future needs.
In the box you will receive:
•
Leko Toro:
1
•
DMX Cable:
1
•
Power Cable
1
•
User Manual
1
Mounting and Operation
Use a clamp rated for the full weight of the Leko Toro to hang the fixture from the mount(s) on
the fixture’s yoke.
As an added safety measure be sure to attached at least one properly rated safety cable
to the fixture using on of the safety cable rigging point integrated in the base assembly or
on the yoke.
Safety Precautions
Caution: For added protection mount the fixtures in areas outside walking paths, seating ar-
eas, or in areas were the fixture might be reached by unauthorized personnel.
Before mounting the fixture to any surface, make sure that the installation area can hold a
minimum point load of 10 items the device’s weight.
Fixture installation must always be secured with a secondary safety attachment, such as an
appropriate safety cable.
Do not clamp the safety cable to the U bracket or clamp. That is not a secondary safety point.
A secondary safety point is any point that will adequately hold the led profile spotlight if the
clamp fails.
Leko Toro– GAMMA LED Vision
Page 3 of 13
