1.
Introduction and Setup
Unpacking and In the Box
Thank you for choosing our Luxé Toro 600 RGBAL. For your own safety, please read this
manual before installing or using the device. This manual covers the important information on
installation and applications. Please install and operate the fixture with following instructions.
Meanwhile, please keep this manual for future needs.
In the box you will receive:
•
Luxé Toro 600 RGBAL:
1
•
5 Pin DMX Cable:
1
•
PowerCon Power Cable 1m
1
Mounting and Operation
Use a clamp rated for the full weight of the Luxé Toro 600 RGBAL to hang the fixture from the
mount(s) on the fixture’s yoke.
As an added safety measure be sure to attached at least one properly rated safety cable
to the fixture using on of the safety cable rigging point integrated in the base assembly or
on the yoke.
Safety Precautions
Caution: For added protection mount the fixtures in areas outside walking paths, seating ar-
eas, or in areas were the fixture might be reached by unauthorized personnel.
Before mounting the fixture to any surface, make sure that the installation area can hold a
minimum point load of 10 items the device’s weight.
Luxé Toro 600 RGBAL– GAMMA LED Vision
Page 3 of 14
