1.
Introduction and Setup
Unpacking and In the Box
Thank you for choosing the Orux 480 Z from GAMMA LED Vision. You will see you have ac-
quired a powerful and versatile moving light.
Inside the box you should find:
•
Orux 480 Z Fixture
1
•
Omega Brackets
2
•
Safety Cable
1
•
DMX Cable
1
•
1m True1 to Edison Cable
1
(Flight case is optional, please contact your dealer)
Please check carefully that there is no damage from shipping. Should there be any problems,
please consult your dealer and don’t use the light until you’ve verified it’s good to go!
Mounting and Operation
Before installation, please read the user manual carefully, then prepare Omega Brack-
ets (2 pcs) and Safety Cable (1 pc).
Clamp Mounting: The Orux 480 Z provides
omega brackets which you can attach clamps
to for typical clamp mounting. Once the clamps are attached to the omega brackets, you
can attach the omega brackets to the fixture via the ½ turn fasteners.
As an added safety measure be sure to attached at least one properly rated safety cable
to the fixture using on of the safety cable rigging point integrated in the base assembly.
Orux 480 Z – GAMMA LED Vision
Page 3 of 23
