Starburst 18x10– GAMMA LED Vision
Page 6 of 16
2. Setup and Operation
Using the LCD Menu and Buttons
Turn on the light, press the
MENU
button to enter the menu mode, use the
UP
and
DOWN
buttons to find the menu,
When the preset menu is displayed on the display screen, press the
ENTER
button to
confirm, use the
UP
and
DOWN
buttons to select the sub menu, press the
ENTER
button to
save the settings or automatically return to the previous menu.
Press the
MENU
button to return, or wait for one minute and then exit the menu mode
automatically. When there is no power connection, press the
UP
button for 1 minute to enter
the menu mode. After setting, press
MENU
button or wait for 1 minute to exit the power-off
setting function automatically.
There are also various status LED’s on the Starburst to show if DMX is active, if the unit is in
Master, Slave, or Sound-Active mode.
1.
DMX means the light is in “DMX mode”. Similarly, SLAVE means the light is in the
“Slave mode”.
2.
The color of the point shows the condition of signal transmission. Green represents
good condition, while red represents the signal is interrupted.
3.
The display shows the working temperature of the light. When temperature are
exceeded, the letters will turn yellow.
