background image

16

Product Warranty

WARRANTY, DISCLAIMERS AND LIMITATION OF LIABILITY:
The Products are covered by the warranty set forth in the following paragraphs. The warranty is
extended only to the purchaser of the Products directly from Seller (or an authorized dealer of
Seller) as new merchandise. For a period of twelve (12) months from the date of original deliv-
ery to Buyer, the Products are warranted to be free from functional defects in materials and
workmanship, provided they are operated under condition of normal use, and that repairs and
replacements are made in accordance herewith. Seller does not warrant bulbs. The foregoing
warranty shall not apply to Products that have been disassembled, altered or repaired (other
than proper replacement bulbs) other than by Seller or if the Product has been subject to abuse,
misuse, negligence or accident.

Seller’s sole and exclusive warranty obligation and Buyer’s sole and exclusive warranty consists
of Seller, at its option, repairing or replacing free or charge Products: (a) which contain a defect
covered by the above warranty; (b) which are reported in writing to Seller not later than seven
(7) days after the expiration of the warranty period; (c) which are returned to Seller promptly
after discovery of the defect; and (d) which are found to be defective by Seller upon Seller’s ex-
amination. Buyer shall pay all transportation charges. SELLER SHALL NOT BE OTHERWISE
LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO INCIDENTAL DAMAGES,
CONSEQUENTIAL DAMAGES, OR SPECIAL DAMAGES OR FOR ANY OTHER LOSS, DAM-
AGE, PENALTY OR EXPENSE OF ANY KIND, INCLUDING BUT NOT LIMITED TO, INCIDEN-
TAL DAMAGES, CONSEQUENTIAL DAMAGES, OR SPECIAL DAMAGES OR FOR ANY
OTHER LOSS, DAMAGE, PENALTY OR EXPENSE OF ANY KIND, INCLUDING, WITHOUT
LIMITATION, LOSS OF PROFITS OR OVERHEAD, REIMBURSEMENT, PERSONAL INJURY
OR PROPERTY DAMAGE. THE AFORESAID WARRANTY OBLIGATION OF SELLER CON-
STITUTES ITS SOLE LIABILITY, AND UNDER NO CIRCUMSTANCES, SHALL THE MAXIMUM
LIABILITY OF SELLER UNDER ANY LEGAL THEORY (e.g. CONTRACT, WARRANTY, NEGLI-
GENCE, PROMISSORY, ESTOPPEL, STRICT LIABILITY, MISREPRESENTATION, TORT)
AND FOR ANY REASON WHATSOEVER (e.g. DEFECT, DELAY OR OTHERWISE) EXCEED
THE PURCHASE PRICE OF THE DEFECTIVE PART, REGARDLESS WHETHER THE CLAIM
IS ASSERTED BY BUYER OR ANY OTHER PERSON OR ENTITY. THE LIABILITIES OF
SELLER, AS ABOVE SET FORTH, SHALL NOT BE EXTENDED BECAUSE OF ADVICE
GIVEN BY IT IN CONNECTION WITH THE DESIGN, INSTALLATION OR USE OF THE PROD-
UCTS OR PARTS THEREFOR.

THERE ARE NO EXPRESS OR IMPLIED WARRANTIES WHICH EXTEND BEYOND THE
WARRANTIES SET FORTH ABOVE. SELLER MAKE NO WARRANTY OF MERCHANTABIL-
ITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE PRODUCTS OR
ANY PARTS THEREOF.

© 2003 GAMMEX- 007179-00-04

Your warranty may be registered at http://www.gammex.com/warranty.asp

Summary of Contents for 403 LE





















Reviews: