background image

6

Phi MKII User Manual  

• 

 Phi3, Phi5 & Phi6 MKII Speakers

OPTIMIZING THE SOUND

  Toe-in: Optimizing the tweeter character 

  You have chosen to setup using the “Regular” or 

  the “Narrow Room” setup. By adjusting the toe-in 

  the tweeter level and character can be optimized.

 

  In a “perfect” acoustic environment our speakers are 

  designed to be listened to app 20-25 degrees off axis, 

  which corresponds to a normal setup with the speakers 

  close to pointing straight. By using toe-in the tweeter 

  will point more towards the listening position thereby 

  increasing its level, as the highest level from the 

  tweeter is obtained directly on axis.

  In the Regular Setup, with the tweeter axis pointing 

  close to straight, use toe-in to increase the tweeter 

  levels, and use toe-out to decrease the tweeter levels 

  In the Narrow Room Setup, The tweeter axis is 

  toed-in to meet in front of the listening position. 

  To increase the tweeter levels toe-out the speakers, 

  and to decrease the tweeter levels toe-in the speakers.              

 

Please note that the increase/decrease in toe when using 

this solution is more critical compared to using the 

wRegular setup, only a few degrees change of Toe will 

cause a great change in subjective tweeter level.

6

M

®

inenT User manual – M3, M5 & M7 Speakers

• 

Toe-in: Optimizing the tweeter character:

 

You have chosen to setup using the “Regular” 
or the “Narrow Room” setup. By adjusting the 
toe-in the tweeter level and character can be 
optimized

•  I

n a “perfect” acoustic environment

 our 

speakers are designed to be listened to app 
20-25 degrees off axis, which corresponds 
to a normal setup with the speakers close to 
pointing straight. By using toe-in the tweeter 
will point more towards the listening position 
thereby increasing its level, as the highest level 
from the tweeter is obtained directly on axis.

• 

In the Regular Setup

, with the tweeter 

axis pointing close to straight, use toe-in to 
increase the tweeter levels, and use toe-out to 
decrease the tweeter levels 

• 

In the Narrow Room Setup

, The tweeter 

axis is toed-in to meet in front of the listening 
position. To increase the tweeter levels toe-out 
the speakers, and to decrease the tweeter 
levels toe-in the speakers. 

Please note

 that the increase/decrease in 

toe when using this solution is more critical 
compared to using the Regular setup, only a 
few degrees change of Toe will cause a great 
change in subjective tweeter level.

The optimized 
listening position

Length /5

Width /7

Width /7

The optimized low 
frequency speaker 
location

Less high frequency; 
more toe-in

More high frequency; 
less toe-in / pointing 
more directly to 
the ear

The Narrow Room

Summary of Contents for Phi3 MKII









Reviews: