G&D DP-HR-U Installation And Operations Download

Page: 116 / 196

User module »DP-HR-U-CON-Fiber«

111

· Target and user modules (DP-HR-U)

Installation

Connecting the console devices

DisplayPort Out:

Connect the monitor of the local console.

Micro In:

Connect the optional microphone of the local console.

Speaker:

Connect the optional speakers of the local console.

Keyb.:

Connect the PS/2 keyboard of the local console.

Mouse:

Connect the PS/2 mouse of the local console.

Keyb./Mouse:

Connect the USB keyboard and/or USB mouse of the local console.

Generic:

By default (

Keyb./Mouse

mode), you can use this interface to connect another

USB input device or supported displays or tablets.

Enable the

Generic HID

mode (see page 175 f.) if you want to connect another USB

input device. In this mode, data of the USB input device remains unaltered when

transmitted to the active target module.

USB Devices:

Connect any USB devices to these interfaces. The data stream of the

connected USB device is transmitted to a compatible target module with up to 16

Mbit/s.

NOTE:

Check the monitor's manual if the OSD provides a setting for the mode of

the DisplayPort input. If so, select the mode in which the image data is processed

according to the standard

DisplayPort 1.1

NOTE:

Both keyboard and mouse signals can be transmitted to the computer using

the PS/2

the USB interfaces.

NOTE:

You can also combine PS/2 and USB devices, for example by connecting a

USB mouse and a PS/2 keyboard.

IMPORTANT:

With enabled

Generic HID

mode, it is

not

possible to operate the OSD

with a keyboard connected to the

Generic

socket.

Transmission

LED Out

Micro In

Keyb./Mouse

Speaker

Generic

Main P

ower

Red. Power

DisplayPort Out

Mouse

Keyb.

USB Devices

Summary of Contents for DP-HR-U





































































































































































































Search results

Summary of Contents for DP-HR-U

Reviews:

Related manuals for DP-HR-U

Brands by name

Popular brands

G&D DP-HR-U, Installation And Operations

Search results

Summary of Contents for DP-HR-U

Reviews:

Related manuals for DP-HR-U

Brands by name

Popular brands