Configuration
187
· Target and user modules (DP-HR-U)
Activating or resetting a PS/2 mouse
Compared to USB mouses, PS/2 mouses do not support hot plug technology. You
can therefore insert the PS/2 plug during operation, but it may be possible that the
computer does not detect the input device.
In order to activate or reset the PS/2 mouse, the matrix system can be used to send
a special command to the computer connected to the target module.
How to start and use the
Mouse utility
function:
1. Press the
Alt+Num
(default) hotkey to open the on-screen display.
2. Select
Mouse utility
and press
Enter
.
3. Select one of the following functions and press
Enter
:
Resetting the default settings
This setting resets the default settings of the extender mode. All settings that have
been changed by the user are reset.
How to reset the default settings of the matrix switch:
1. Press the
Alt+Num
(default) hotkey to open the on-screen display.
2. Select
Console utility
and press
Enter
.
3. Select
Set system defaults
and press
Enter
.
NOTE:
Since the commands differ depending on the used mouse type and the
installed operating system, four different functions are provided.
Reset Mouse:
Resets the PS/2 mouse interface of a Windows
computer
Enable mouse (for Unix):
Activates the PS/2 mouse of a Linux computer
Enable Intelli:
Activates the PS/2 wheel mouse of a Linux computer
Enable Intelli-Explorer:
Activates the PS/2 wheel mouse with additional
keys of a Linux computer
Summary of Contents for DP-HR-U
Page 1: ...A9200141 1 30 G D Target and User Modules Installation and Operation DP HR U variants EN ...
Page 194: ... ...
Page 195: ... ...
