Target and user modules (DP-HR-U) ·
175
In
Generic HID
mode, data of the USB input device connected to the
Generic
socket of
the user module remains
unaltered
when transmitted to the active target module.
The use of
Generic HID
devices is possible only after you enable the
Generic HID
mode
of the user module and of the target module.
In
Generic HID
mode, you can connect USB hubs or USB composite devices to the
Generic
socket of the user module.
USB composite devices are USB devices that are connected to a computer via
one
USB
cable, but consist of separate HID devices (e.g. keyboard/mouse or touchpad/mouse.
When connecting a USB hub or a USB composite device containing multiple USB
devices, only the first of the connected HID devices can be used in
Generic HID
mode. The OSD informs you if other HID devices of the composite device or the
hub are detected.
Enabling/disabling the user module’s
Generic HID mode
How to enable/disable the user module’s Generic HID mode:
1. Press
Ctrl+Num
(default) to open the on-screen display.
2. Press
F11
to open the
Configuration
menu.
3. Select
Console
and press
Enter
.
NOTE:
With enabled
Generic HID
mode, it is
not
possible to operate the OSD with a
keyboard connected to the
Generic
socket.
NOTE:
In
Multi User mode
, the
Generic HID
device is available to the first active user
module. Once the user module logs off and another user module logs in, the
Generic HID
device of the now active user module becomes available.
C
Generic HID
Summary of Contents for DP-HR-U
Page 1: ...A9200141 1 30 G D Target and User Modules Installation and Operation DP HR U variants EN ...
Page 194: ... ...
Page 195: ... ...
