Initial configuration of the network settings
G&D DVI-Vision-IP-Fiber ·
37
English
Configuring global network settings
Even in complex networks global network settings ensure that the KVM extender is
available from all partial networks.
How to configure global network settings:
1. Open the remote OSD of the computer module by pressing the
remote hotkey
(
default
:
Ctrl+Num
), if you want to change the configuration of the computer mod-
ule.
Open the local OSD of the console module by pressing the
local hotkey
(
default
:
Alt+Num
), if you want to change the configuration of the console module.
2. Select the row
Network setup
and press
Enter
(remote OSD) or
F11
, select the row
Net-
work
and press
Enter
(local OSD).
3. Select the entry
Interfaces
and press
Enter
.
4. Enter the following data under
Main Network
:
5. Press
F2
to save your settings.
Global
preferences:
Press
F8
to select the global preferences:
Static:
uses static settings.
DHCP:
obtains settings from a DHCP server.
Hostname:
Enter the device hostname.
Domain:
Enter the domain the device is to belong to.
Gateway:
Enter the gateway IP address.
DNS Server 1:
Enter the IP address of the DNS server.
DNS Server 2:
Optionally, enter the IP address of another DNS server.
Summary of Contents for DVI-Vision-IP-Fiber
