Configuration
84
· G&D DVI-Vision-IP-Fiber
Reducing the colour depth of the image data to be transmitted
In the default settings, the KVM extender transmits the image information with a
maximum colour depth of 24 bit to the console module.
Using a high resolution and displaying moving images can result in the console
module “skipping” several images.
In such cases, reduce the colour depth of the image data to 18 bits. This way the
data volume to be transmitted can be reduced.
How to change the colour depth of the image data to be transmitted:
NOTE:
Depending on the image contents, reducing the colour depth may result in
slight colour grades.
OSD
1. Press
Ctrl+Num
(
default
) to open the OSD.
2. Select the row
Target setup
and press
Enter
.
3. Under
Color depth
press
F8
to select on of the following options:
24 Bit:
transmits the image data with a maximum colour depth
of 24 bits (
default
)
18 Bit:
reduces the colour depth of image data to 18 bits
4. Press
F2
to save your settings.
Summary of Contents for DVI-Vision-IP-Fiber
