Introduction
4
· G&D MultiPower-6-NT
Introduction
The central power supply
MultiPower-6-NT
supplies up to six devices with 12 Volt. The
maximum power consumption permitted per device is 1.6A.
Use power loop cables to connect the Mini-DIN 4 sockets of up to six devices to one
of the Mini-DIN 4 sockets of the central power supply.
Two internal power packs ensure the redundant power supply of the
Multi-
Power-6-NT
.
The LEDs on the front and the back panel show the device’s operating status and
the load of all active devices.
The web application
Config Panel
provides a graphical user interface to monitor the
central power supply.
By default, the central power supply switches on all 6 power outlets. You can also
switch each
Power Out
socket separately via »Config Panel«, SNMP or text-based
control (see page 7).
Package contents
1 × central power supply
MultiPower-6-NT
6 × power loop cables
2 × power cable
1 × USB service cable
1 × manual
M
ULTI
P
OWER
-
6
-
NT
Main Power
Red. Power
Power Status
Load
Service
Power
Red.
Main
Power Out 1
Status
12VDC/1,6A
Power Out 2
Status
12VDC/1,6A
Power Out 3
Status
12VDC/1,6A
Power Out 4
Status
12VDC/1,6A
Power Out 5
Status
12VDC/1,6A
Power Out 6
Status
12VDC/1,6A
