I
CONTROLLER AND NAVIGATION
:UP
:ENTER
:DOWN
:
ALARM
:PROGRAM
:ESCAPE
:SET
:INFO
:POWER
Set Screens:
1. Glycol set point: Ensure you see
in the bottom right of the display screen.
a. You can change options from SET, INFO and POWER by using the UP and DOWN
buttons.
b. Press ENTER to navigate to the glycol temperature set screen.
c. Press ENTER again to navigate to the numerical readout. Use UP and DOWN buttons to
adjust to desired setpoint.
2. Pump pressure set point: Ensure you see
in the bottom right of the display screen.
a. Press DOWN until you see pump pressure set point.
b. Press ENTER button to navigate to numerical readout and adjust with UP and DOWN to
set pump pressure. Please note that pressure setpoints are preset.
Info screens:
1. Ensure you see
in the bottom right portion of the display screen.
2. Press ENTER to navigate to the first information screen.
3. Use DOWN to scroll through the information screens.
Alarms:
1. Press ALARM.
2. Navigate with UP and DOWN to see current alarms.
a. To clear the alarms, press UP or DOWN through alarm screen until you see a prompt
saying “press Alarm button for 3 seconds.”
b. To check alarm history, cycle through all active alarms and press “enter to data logger.”
1
5
INSTALLATION GUIDE • USER MANUAL
VERTICAL AIR SERIES
G&D CHILLERS, INC.
•
GD-VA-R202
2
C