background image

 

9 | 

P a g e

 

 

7. Cautions for operation

 

7.1 For best performance, the balance should be put on an stable desk, where there 

is no vibration. 

 
7.2  Using  environment:  indoor,  max.  Altitude:  2000m,  temperature:  0-40

humidity ≤80%, Power fluctuations less than ±10% 

 
7.3 The electronic scale is a precision instrument which needs to be gently handled 

during  the  weighing  of  articles.  Avoid  impact  and  heavy  load  on  top  (never 
exceed  its  max.  weighing  limit).  Any  forms  of  impact  or  overloading  many 
cause permanent damage to the electronic balance, even in the use of electronic 
balance without power supply.   

 
7.4.  Please  use  separate  and  individual  plug  for  the  balance  to  avoid  any  possible 

interference or disturbance.   

 
7.5 Place the scale on a firm  table for operation, and make sure that the operating 

environment of the balance is free of great vibration and interference of power 
supply, and of corrosive gases and liquids.   

 
7.6 Ensure the warm-up time after power-on. 
 
7.7 Remove the object on the pan by turning on the balance 
 
7.9 Avoid any water contact with the balance 

 
      7.10 Warning: If the equipment is used in a manner not specified by this instruction 

the perfection provided by the equipment may be impaired 

 
      7.11 Gentle handling in daily using, with dry and clean cotton cloth cleaning.

 

 

Summary of Contents for TC50K












Reviews: