Page 11 of 17
Step #10
(Right Brace to Hitch Assembly)
1. Attach the second brace (28368713-
4) to the 1/4” hole on the ri
ght side of the hopper using the 1/4 x 1/2
hex bolt and 1/4" flange nut. Do not tighten bolt.
2. Remove the 1/4" flange nut from the 1/4 x 1-3/4 bolt holding the left brace in place to the hitch tube.
3. Attach the other end of brace to the 1/4 x 1-3/4 bolt and re-install the 1/4" flange nut.
4. Next securely tighten the three 1/4" bolts holding the braces in place.
5. Now securely tighten the 5/16
”
flange nut holding the hitch tube to the hopper.
Diagram #19
2836-T6
