Page 13 of 17
Step #13
(Hitch Plate Assembly)
Locate the TWO Hitch Plates (28364-4), TWO 1/4 x 1-3/4 hex bolts (C03-00250-070) and TWO 1/4" flange nuts
(C01-0250-030).
Attach the hitch plates to the two holes in the hitch tube using the listed hardware as shown in Diagram #22.
Tighten hardware securely.
Diagram #22
2836-T8
Step #14
(Lift Handle Assembly)
Locate Lift Handle (2808886-9), TWO 1/4 x 1/2 hex bolts (C03-0250-010) and TWO 1/4" flange nuts
(C01-0250-030).
Attach Lift Handle to the two 1/4" hole in the front of the hopper as shown in Diagram #23 using the listed
hardware and tighten hardware securely.
Diagram #23
2836-A11
