Basic Functions
20
Hydromette BL Compact TF 3
2.3.5
Saved menu
In this menu, the last 5 measured values are saved. The view and
the respective units depend on the measuring mode selected.
The memory location number "r1" is
displayed for approx. 1 second, and then
the last measured saved value contained
there is displayed.
You can recognize saved values as there is
no "Hold" symbol in the display.
As soon as you select the saved menu, the
memory location number "r1" is displayed
for approx. 1 second, and then the last
measured saved value contained there is
displayed.
The last 5 measured values are automatically saved and stored in
memory locations "r1" to "r5". The last measured value is in
memory location "r1". This is a ring buffer. As soon as the sixth
measured value is recorded, the "first" (first measured) measured
value is automatically removed from the buffer.
With a
short
press of the
"M"
button, the next memory location "r2"
is selected and the value contained there is displayed. After
reaching the 5th memory location, the first is shown again.
The menu can be exited with the
up
and
down
buttons.
Figure 2-8: memory location "r1"
