Introduction
10
Data logger Klima 20 / 30
1.5
Display symbols - Klima 30
Measurement 1
Shown in the upper part of the display ; shows the actual temperature
value measured by the internal sensor
Unit measurement
1
This sign informs about the currently selected measurement unit of
reading 1
It is possible to switch between °C = Celsius, °F = Fahrenheit,
%RH = relative humidity, td = dew point temperature
Measurement 2
Values of the internal or external temperature sensor will be displayed;
internal sensor: Maximum, minimum and average values
Unit measurement
2
This sign informs about the currently selected measurement unit of
reading 2 (°C, °F, %RH or td possible)
MIN-MAX-AVG
Shows the min-, max- and average temperature
Status info
Mode „LOG“ or „STOP“ is displayed; „LOG“: data logger records;
„STOP“: no measurement values are recorded
Battery indicator
Current state of the battery
External
temperature sensor
EXT = external temperature sensor is adapted; value is shown at
measurement 2
Measurement 1
Status info
AVG
– MIN - MAX
Unit
measurement 1
Battery
Unit
measurement 2
Figure 1-4 Display symbols Klima 30
External
temperature
sesnor
Measurement 2
