Basic functions
13
Data logger Klima 20 / 30
2.4
Max-, Min and average temperature values
Klima 20
: The display switches in 10-seconds clock between the Max-, Min- and
average temperature values. It is not possible to change manually between the values.
Klima 30
: By pressing the Mode-Button, is it possible to display the Max-, Min- or
average temperature value as long as desired. By choosing the AUT-Mode, the display
switches in a 2-seconds clock between the values. Please note: the Max-, Min- and
average temperature values only can be displayed if no external temperature sensor is
connected to the data logger.
2.5
Display elements (figure 1-2 / figure 1-4)
The LCD-display informs about two measurement values and it also informs about
some status information. It is possible to switch the display off by using the GANN
software dialog D+. If the display is switched off, you can prevent that unwanted
information is not shown.
2.5.1
Further display information
Using the GANN software dialog D+, it is possible to program the data logger to
automatically switch off the display after some time. Furthermore, the display shows
different states:
Display off
Connected to the
computer
Data logger is
programmed
Data logger records
Low battery; please
change
Settings on delivery
