![background image](http://html1.mh-extra.com/html/ganterud/l3/l3_user-manual_3404422008.webp)
Copyright © Ganterud Lifting Solutions AB | www.ganterud.se | info@ganterud.se
8
2.4.5 Long load
2.4.6 Relieving the load from the lifting yoke
The chain angle must be as wide as possible,
although not exceeding 60°, to reduce the strain
on the lifting yoke in the event the load should
start to swing.
Lift the load first, level once it is freely suspended.
The load must be horizontal when placed on
a flat surface, or the load on both attachment
points must be relieved at the same time.
2.4.4 Centring
The lifting yoke must be centred above the load’s
centre of gravity within a specified margin of
error, in accordance with the lifting table.
The chain must be tensioned on both sides before
lifting may be carried out.