GAT ECO.Side Lock 7000 BA / NW BA
General Information
www.gantner.com
HB_GAT-GAT-ECOSide-Lock7000-BA--EN_14
11
2
GENERAL INFORMATION
2.1 Intended Use
The GAT ECO.Side Lock 7000 BA is intended for the electronic locking of wardrobe lockers in facilities such as
fitness clubs, baths, golf resorts, hotels, and other individual company applications. The GAT ECO.Side Lock 7000
BA is locked / unlocked using contactless RFID (Radio Frequency Identification) data carriers.
2.2 Functional Description
The GAT ECO.Side Lock 7000 BA is suitable for any type of locker material (e.g., sheet metal, wood, HPL, solid
plastic, glass) and can be used for left- and right-hinged doors alike. Due to the mechanical compatibility with the
GAT NET.Lock 7000 series a quick and simple installation of existing locker rooms using the GAT ECO.Side Lock
7000 BA is possible.
The GAT ECO.Side Lock 7000 BA is installed on the inner side of the locker body. A bolt set is mounted on the
inside of the locker door. The bolt set holds the door shackle which inserts into the GAT ECO.Side Lock 7000 BA
and locks the door. The GAT NET.Lock BoltSet 7100 is designed for use with locker doors made from wood, HPL,
and solid plastic. For locker doors made from metal, use the GAT NET.Lock BoltSet 7200 and for glass locker
doors, the GAT NET.Lock BoltSet 7300 is available. The bolt sets include a passive booster used to amplify the
RFID reading field.
The GAT ECO.Side Lock 7000 BA is powered by one 3.6 V AA battery, which provides an operating life of up to 10
years* (at room temperature) before requiring replacement. The configuration (e.g., operating mode) of the GAT
ECO.Side Lock 7000 BA can be done on site via USB interface and GAT Config Manager configuration software or
using the programming data carrier. For the GAT ECO.Side Lock 7000 NW BA, communication via the integrated
wireless interface is also possible.
Using a locker
The user closes the door of their locker and while holding the door shut, holds their data carrier next to the RFID
reading field on the locker door (the reading field is indicated by an LED inside the lock). The GAT ECO.Side Lock
7000 BA reads the data carrier information and determines if the user is allowed to use the locker (depending on
their authorization status). If the user is authorized to use the locker, the GAT ECO.Side Lock 7000 BA locks the
locker door.
To unlock a previously locked locker, the user presses the locker door while holding their data carrier next to the
RFID reading field. The GAT ECO.Side Lock 7000 BA checks that the data carrier has valid authorization before
automatically unlocking the locker door.
* Different operating modes or configurations can reduce the battery lifetime.
Summary of Contents for GAT ECO.Side Lock 7000 BA
Page 63: ......
