GAT ECO.Side Lock 7000 BA / NW BA
Commissioning
36
HB_GAT-GAT-ECOSide-Lock7000-BA--EN_14
www.gantner.com
►
Plug the Micro-B connector of the USB cable into the USB port on the GAT ECO.Side Lock 7000 BA.
o
After connecting the GAT ECO.Side Lock 7000 BA to the PC/laptop for the first time, the lock
drivers are installed, and the lock is automatically recognized.
If a dri
ver is requested, they are available on the “Leisure Software” USB stick, which is included in the GAT
ECO.Basic Set B BA.
► Hold the SERVICE
data carrier next to the RFID reading field.
o
The GAT ECO.Side Lock 7000 BA enters into configuration mode. The LED pulses green every 2
seconds to indicate this state.
► Click on “Configure” in GAT Config Manager to open the settings.
Summary of Contents for GAT ECO.Side Lock 7000 BA
Page 63: ......