4
www.gantner.com
Valid from June 10th, 2015 • Technical data subject to modification without notice!
DB_GAT-ECOSide-Lock7000--EN_11.indd • Part No. 642832
Mounting on Metallic Doors
Cut-outs in the locker door
Cut-outs must be made in the inside and outside walls of the locker
door to mount the GAT NET.Lock Bolt Set 7200 and label carrier. The
installation procedure is described on the next page. The measurements
for the cut-outs are shown in the diagram below.
2
2
6
7
1
6
9
6
6
10
7
123
11
7
5
1
Loc
ker wall
50 mm (1.9´´)
6 mm (0.24´´)
94 mm (3.7´´)
Loc
ker door (outside wall)
Loc
ker door (inside wall)
74 mm (2.91´´)
17 mm (0.67´´)
min. 18 mm (0.71´´)
max. 26 mm (1.02´´)
Inside of locker
Locker door
(Front view without label carrier)
Locker door
(Front view with label carrier)
15.1 mm (0.59´´)
32.6 mm (1.28´´)
Loc
ker wall
Locker door
(Front view with label carrier)
L
oc
ker wall
3
3
17
.4 mm
(0.6
8´´)
3
3
3
3
9
8
9
LED
6
8
6
LED position
Cut-out on outside wall
Cut-out on inside wall
Loc
ker door (outside wall)
Loc
ker door (inside wall)
Inside of locker
Loc
ker wall
Locker door (outer wall)
Cut-out area marked in grey
4 x holes for screws,
Ø 3.6 mm (0.14´´)
Locker door (inner wall)
Cut-out area marked in grey
3
0.4 mm (1.2´´)
63.1 mm (2.4
8´´)
67.6 mm (2.66´´)
16.8 mm (0.66´´)
29.1 mm (1.14´´)
3
8.9 mm (1.53´´)
43.4 mm (1.7
1´´)
33.6 mm (1.32´´)
62.6 mm (2.46´´)
29 mm
(1.14´´)
16.8 mm
(0.66´´)
19.3 mm
(0.76´´)
1. GAT ECO.Side Lock 7000
2. GAT NET.Lock Bolt Set 7200
3. Mounting screws for GAT ECO.Side Lock 7000
5. Door contact
6. Mounting screws for bolt set
7. LED position
8. Cut-out for GAT NET.Lock BoltSet 7200
9. Cut-out for label carrier
10. Label carrier
