GAT ECO.Side Lock 7010 (NW) F/ISO
Introduction
10
HB_GAT-ECOSide-Lock7010-FISO--EN_11
www.gantner.com
1.4 Target Groups
This manual contains information relevant for the different stages in the operating life of the GAT ECO.Side Lock 7010
F/ISO. Information regarding the installation, commissioning, and service/maintenance of the GAT ECO.Side Lock
7010 F/ISO is separated into corresponding chapters. When a chapter is intended for a specific audience, this is
clarified at the beginning of the chapter.
Information for the following target groups is available in this manual:
- Installation technicians (installation, operation, configuration).
- Service technicians and cleaning personnel (service and maintenance).
- End users of the GAT ECO.Side Lock 7010 F/ISO (user manual).
Where not explicitly stated, the information in this manual is intended for all target groups in general.
CAUTION!
Injury and property/equipment damage.
The tasks described in each chapter must only be
performed by the specified target group. Unqualified personnel who perform the described tasks risk personal injury
or damaging property/equipment.
1.5 Formatting
1.5.1
Safety-Critical Information
The following formatting (with example text) is used in this manual to display important, safety-critical information
that must be read and followed.
NOTE!
Following on from this signal word in the manual is a reference text that must be read and followed. The
reference text contains important information. Non-observance can lead to damage of the device or associated
equipment.
1.5.2
Non-Safety-Critical Information
The following formatting (with example text) is used in this manual to display important, but not safety-critical
information.
The text accompanying this symbol contains interesting information relevant to the current chapter. You do not
necessarily need to read this text; however, it will help you better understand the information in this section or
provide interesting tips for the described device or the operation of the software.
1.5.3
Instructions and Results
Instructions, which must be completed by the reader, and the results of these instructions are formatted as follows.
► This symbol represents an action or instruction that that must be followed.
o
This symbol represents the result after completing the previous instruction.
Summary of Contents for GAT ECO.Side Lock 7010 F/ISO
Page 63: ......
