GAT ECO.Side Lock 7010 (NW) F/ISO
Cleaning and Maintenance
www.gantner.com
HB_GAT-ECOSide-Lock7010-FISO--EN_11
59
7
CLEANING AND MAINTENANCE
Risk of damage or failure to the GAT ECO.Side Lock 7010 (NW) F/ISO
-
The instructions described in this chapter may only be carried out by suitably trained personnel.
-
The warnings in this chapter must be observed and followed during functional testing, cleaning, and
maintenance.
7.1 Target Group
This chapter provides information for the technicians and cleaning personnel who are responsible for the periodical
cleaning and maintenance of the GAT ECO.Side Lock 7010 F/ISO and GAT ECO.Side Lock 7010 NW F/ISO (the
general term GAT ECO.Side Lock 7010 F/ISO is used for both locks in the following description).
7.2 Functional Testing
To ensure that the locker locks are functioning correctly, periodically test the functionality of the locker doors and
lock components.
Frequency
- After every 1000 locking operations, or,
- If the locking function of a locker door is impaired.
Instructions
► Press the locker door shut.
o
The door shackle must enter the corresponding opening in the lock centrally without touching the
opening. The door must close shut without increased effort. Readjust the door (see below) if these
conditions are not met.
o
The GAT Lock Bolt Set must touch the front of the door lock when the door is pressed shut. Readjust
the door (see below) if it does not.
► While pressing the locker door shut, hold an authorized data carrier near the reading field on the door.
o
The locker door must lock. If it does not, check that the data carrier authorization is valid.
► While the locker door is locked, press the door in slightly with the fingers several times.
o
The door must be able to be pressed in slightly, one or two millimeters, and then return by itself. If the
door gets jammed or is stiff, it must be readjusted (see below).
► While the locker door is locked, hit the door with the palm of the hand (do not damage the door).
o
The alarm must not be triggered.
Summary of Contents for GAT ECO.Side Lock 7010 F/ISO
Page 63: ......
